I-FS32K116LFT0VLFT ARM Microcontrollers – MCU S32K116 32-bit MCU, ARM Cortex-M0+

• Izici zokusebenza

Ibanga lamandla kagesi: 2.7 kuya ku-5.5 V

- Izinga lokushisa elizungezile: -40 °C kuya ku-105 °C kumodi ye-HSRUN, -40 °C kuya ku-150 °C kumodi ye-RUN

• I-Arm™ Cortex-M4F/M0+ core, 32-bit CPU

- Isekela imvamisa efika ku-112 MHz (imodi ye-HSRUN) ene-1.25 Dhrystone MIPS nge-MHz ngayinye

- I-Arm Core isekelwe ku-Armv7 Architecture kanye neThumb®-2 ISA

- Iphrosesa Yesiginali Edidiyelwe Yedijithali (DSP)

- Isilawuli Se-Nested Vectored Interrupt Controller esilungisekayo (i-NVIC)

- I-Single Precision Floating Point Unit (FPU)

• Izixhumanisi zewashi

- 4 - 40 MHz i-oscillator yangaphandle esheshayo (SOSC) enewashi elifaka isikwele langaphandle elingafika ku-50 MHz DC kwimodi yewashi yangaphandle

– 48 MHz Fast Internal RC oscillator (FIRC)

– 8 MHz Slow Internal RC oscillator (SIRC)

– 128 kHz I-Low Power Oscillator (LPO)

– Kufikela ku-112 MHz (HSRUN) Iluphu yeSistimu yokukhiya (SPLL)

- Kufika ku-20 MHz TCLK kanye no-25 MHz SWD_CLK

- 32 kHz Iwashi langaphandle le-Real Time Counter (RTC_CLKIN)

• Ukuphathwa kwamandla

- Umgogodla we-Arm Cortex-M4F/M0+ onamandla aphansi osebenza kahle kakhulu

- I-Power Management Controller (PMC) enezindlela eziningi zamandla: i-HSRUN, RUN, STOP, VLPR, ne-VLPS. Qaphela: I-CSEc (Ukuphepha) noma i-EEPROM ibhala/isula kuzocupha amafulegi ephutha kumodi ye-HSRUN (112 MHz) ngoba lesi simo sokusebenzisa asivunyelwe ukusebenza ngesikhathi esisodwa. Idivayisi izodinga ukushintshela kumodi ye-RUN (80 MHz) ukuze isebenzise i-CSEc (Ukuphepha) noma i-EEPROM ibhala/isule.

- Ukungena kwewashi nokusebenza kwamandla aphansi kusekelwa kuma-peripherals athile.

• Inkumbulo nenkumbulo

- Kufika ku-2 MB inkumbulo yohlelo lwe-flash nge-ECC

- I-64 KB FlexNVM yememori ye-flash yedatha ene-ECC ne-EEPROM yokulingisa. Qaphela: I-CSEc (Ukuphepha) noma i-EEPROM ibhala/isula izocupha amafulegi amaphutha kumodi ye-HSRUN (112 MHz) ngoba lesi simo sokusebenzisa asivunyelwe ukusebenza ngesikhathi esisodwa. Idivayisi izodinga ukushintshela kumodi ye-RUN (80 MHz) ukuze isebenzise i-CSEc (Ukuphepha) noma i-EEPROM ibhala/isule.

- Kufika ku-256 KB SRAM nge-ECC

- Kufika ku-4 KB ye-FlexRAM ukuze isetshenziswe njenge-SRAM noma i-EEPROM yokulingisa

- Kufikela ku-4 KB Code inqolobane ukuze unciphise umthelela wokusebenza wokubambezeleka kokufinyelela kwimemori

- I-QuadSPI esekelwa yi-HyperBus™

• I-analogi yesiginali exubile

- Kufika ku-12-bit Analog-to-Digital Converter (ADC) efinyelela ku-32 wesiteshi okokufaka kwe-analog module ngayinye

- I-Analog Comparator eyodwa (CMP) ene-8-bit Digital yangaphakathi kuya ku-Analog Converter (DAC)

• Umsebenzi wokulungisa iphutha

- Imbobo ye-Serial Wire JTAG Debug Port (SWJ-DP) ihlanganisa

- I-Debug Watchpoint kanye ne-Trace (DWT)

- I-Instrumentation Trace Macrocell (ITM)

– Test Port Interface Unit (TPIU)

- Iyunithi ye-Flash Patch ne-Breakpoint (FPB).

• Isixhumi esibonakalayo somshini womuntu (HMI)

- Kufika ku-156 GPIO izikhonkwane ezinokuphazamiseka kokusebenza

- Ukuphazamiseka Okungafihleki (i-NMI)

• Izixhumanisi zezokuxhumana

- Kufika kumamojula amathathu aphansi we-Low Power Universal Asynchronous Receiver/Transmitter (LPUART/LIN) anokusekelwa kwe-DMA kanye nokutholakala kwamandla aphansi

- Kufika kumamojula amathathu we-Low Power Serial Peripheral Interface (LPSPI) anokusekelwa kwe-DMA kanye nokutholakala kwamandla aphansi

- Kufika kumamojula amabili aphansi we-Low Power Inter-Integrated Circuit (LPI2C) anokusekelwa kwe-DMA kanye nokutholakala kwamandla aphansi

- Kufika kumamojula amathathu e-FlexCAN (ngokuxhaswa kokuzithandela kwe-CAN-FD)

- Imojula ye-FlexIO yokulingisa izivumelwano zokuxhumana kanye nama-peripherals (UART, I2C, SPI, I2S, LIN, PWM, njll).

- Kufika ku-10/100Mbps Ethernet eyodwa esekelwa yi-IEEE1588 namamojula amabili e-Synchronous Audio Interface (SAI).

• Ukuphepha Nokuvikeleka

- I-Cryptographic Services Engine (CSEc) isebenzisa isethi ebanzi yemisebenzi yokufihla ulwazi njengoba kuchazwe ku-SHE (Secure Hardware Extension) Ukucaciswa Kokusebenza. Qaphela: I-CSEc (Ukuphepha) noma i-EEPROM ibhala/isula izocupha amafulegi amaphutha kumodi ye-HSRUN (112 MHz) ngoba lesi simo sokusebenzisa asivunyelwe ukusebenza ngesikhathi esisodwa. Idivayisi izodinga ukushintshela kumodi ye-RUN (80 MHz) ukuze isebenzise i-CSEc (Ukuphepha) noma i-EEPROM ibhala/isule.

– 128-bit inombolo ye-Unique Identification (ID).

- Ikhodi Yokulungisa Iphutha (ECC) kumemori ye-flash ne-SRAM

- Iyunithi Yokuvikela Imemori Yesistimu (I-MPU yesistimu)

- Imojula ye-Cyclic Redundancy Check (CRC).

- I-watchdog yangaphakathi (WDOG)

- Imojula ye-Watchdog Monitor (EWM) yangaphandle

• Isikhathi nokulawula

- Amamojula azimele ayisishiyagalombili e-16-bit FlexTimers (FTM), anikela ngamashaneli ajwayelekile angama-64 (IC/OC/PWM)

– I-16-bit Low Power Timer (LPTMR) eyodwa enokulawula okuguquguqukayo kokuvuka

- Amabhulokhi Okubambezeleka Okuhlelekayo Okubili (PDB) anohlelo lwe-trigger oluguquguqukayo

– I-32-bit Low Power Interrupt Timer (LPIT) eyodwa eneziteshi ezi-4

- I-32-bit Real Time Counter (RTC)

• Iphakheji

– 32-pin QFN, 48-pin LQFP, 64-pin LQFP, 100-pin LQFP, 100-pin MAPBGA, 144-pin LQFP, 176-pin LQFP izinketho zephakheji

• Iziteshi ezingu-16 ze-DMA ezinezicelo ezingafika ku-63 zisebenzisa i-DMAMUX