FS32K146HFT0VLHT ARM Microcontrollers MCU S32K146 M4F Flash 1M RAM 128KB

• Izici zokusebenza
Ibanga lamandla kagesi: 2.7 kuya ku-5.5 V
- Izinga lokushisa le-ambient: -40 °C kuya ku-105 °CImodi ye-HSRUN, -40 °C ukuya ku-150 °C kumodi ye-RUN

• I-Arm™ Cortex-M4F/M0+ core, 32-bit CPU
- Isekela imvamisa kufika ku-112 MHz (imodi ye-HSRUN)nge-1.25 Dhrystone MIPS nge-MHz ngayinye
- I-Arm Core esekelwe ku-Armv7 Architecture kanyeIsithupha®-2 ISA
- Iphrosesa Yesiginali Edidiyelwe Yedijithali (DSP)
- Isilawuli Esiphazamisayo Esine-Vectored Esilungisekayo(NVIC)
- I-Single Precision Floating Point Unit (FPU)

• Izixhumanisi zewashi
- 4 - 40 MHz i-oscillator yangaphandle esheshayo (SOSC) ene-upkuya ku-50 MHz DC iwashi lokufaka isikwele sangaphandle ngaphakathiimodi yewashi yangaphandle
– 48 MHz Fast Internal RC oscillator (FIRC)
– 8 MHz Slow Internal RC oscillator (SIRC)
– 128 kHz I-Low Power Oscillator (LPO)
– Kufikela ku-112 MHz (HSRUN) Ukhiye Wesistimu WezigabaIluphu (SPLL)
- Kufika ku-20 MHz TCLK kanye no-25 MHz SWD_CLK
– 32 kHz Real Time Counter iwashi langaphandle(RTC_CLKIN)

• Ukuphathwa kwamandla
- Umgogodla we-Arm Cortex-M4F/M0+ enamandla aphansi ngeukusebenza kahle kwamandla okuhle kakhulu
– Power Management Controller (PMC) nge multipleizindlela zamandla: HSRUN, RUN, STOP, VLPR, kanyeI-VLPS. Qaphela: I-CSEc (Ukuphepha) noma i-EEPROM ibhala/ukusula kuzocupha amafulegi ephutha kumodi ye-HSRUN (112MHz) ngoba leli cala lokusebenzisa alivunyelwesebenzisa kanyekanye. Idivayisi izodingashintshela kumodi ye-RUN (80 MHz) ukuze usebenzise i-CSEc(Ezokuphepha) noma i-EEPROM ibhala/iyasula.
- Ukungena kwewashi nokusebenza kwamandla aphansi kusekelwaama-peripherals athile.

• Inkumbulo nenkumbulo
- Kufika ku-2 MB inkumbulo yohlelo lwe-flash nge-ECC
- 64 KB FlexNVM yememori ye-flash yedatha nge-ECCkanye nokulingiswa kwe-EEPROM. Qaphela: CSEc (Security) nomaI-EEPROM ibhala/isula izobangela amafulegi amaphutha phakathiImodi ye-HSRUN (112 MHz) ngoba lesi simo sokusebenzisa siyiakuvunyelwe ukwenza kanyekanye. Idivayisiuzodinga ukushintshela kumodi ye-RUN (80 MHz) ukuzesebenzisa i-CSEc (Ukuphepha) noma i-EEPROM ibhala/sula.
- Kufika ku-256 KB SRAM nge-ECC
- Kufika ku-4 KB ye-FlexRAM ukuze isetshenziswe njenge-SRAM nomaUkulingisa kwe-EEPROM
- Kufika ku-4 KB Code inqolobane ukuze unciphise ukusebenzaumthelela wokubambezeleka kokufinyelela inkumbulo
- I-QuadSPI esekelwa yi-HyperBus™

• I-analogi yesiginali exubile
- Kufika ku-12-bit Analog-to-Digital Converter amabili(I-ADC) enokufakwa kwe-analog kwesiteshi okungafika kwangu-32 ngakunyeimojula
- I-Analog Comparator eyodwa (CMP) ene-8-bit yangaphakathiI-Digital kuya ku-Analog Converter (DAC)

• Umsebenzi wokulungisa iphutha
- Imbobo ye-Serial Wire JTAG Debug Port (SWJ-DP) ihlanganisa
- I-Debug Watchpoint kanye ne-Trace (DWT)
- I-Instrumentation Trace Macrocell (ITM)
– Test Port Interface Unit (TPIU)
- Iyunithi ye-Flash Patch ne-Breakpoint (FPB).

• Isixhumi esibonakalayo somshini womuntu (HMI)
- Kufika ku-156 GPIO izikhonkwane ezinokuphazamiseka kokusebenza
- Ukuphazamiseka Okungafihleki (i-NMI)

• Izixhumanisi zezokuxhumana
- Kufika kumamojula amathathu aphansi we-Universal Asynchronous Receiver/Transmitter (LPUART/LIN) anokusekelwa kwe-DMAkanye nokutholakala kwamandla aphansi
- Kufika kumamojula amathathu we-Low Power Serial Peripheral Interface (LPSPI) anokusekelwa kwe-DMA kanye nokutholakala kwamandla aphansi
- Kufika kumamojula amabili aphansi we-Low Power Inter-Integrated Circuit (LPI2C) anokusekelwa kwe-DMA kanye nokutholakala kwamandla aphansi
- Kufika kumamojula amathathu e-FlexCAN (ngokuxhaswa kokuzithandela kwe-CAN-FD)
- Imojula ye-FlexIO yokulingisa izivumelwano zokuxhumana kanye nama-peripherals (UART, I2C, SPI, I2S, LIN, PWM, njll).
- Kufika ku-10/100Mbps Ethernet eyodwa esekelwa yi-IEEE1588 namamojula amabili e-Synchronous Audio Interface (SAI).

• Ukuphepha Nokuvikeleka
- I-Cryptographic Services Engine (CSEc) isebenzisa isethi ebanzi yemisebenzi ye-cryptographic njengoba kuchazwe ku-I-SHE (Secure Hardware Extension) Ukucaciswa Okusebenzayo. Qaphela: I-CSEc (Ukuphepha) noma i-EEPROM ibhala/isula izokwenza
cupha amafulegi ephutha kumodi ye-HSRUN (112 MHz) ngoba lesi simo sokusebenzisa asivunyelwe ukusebenza ngesikhathi esisodwa. Iidivayisi izodinga ukushintshela kumodi ye-RUN (80 MHz) ukuze isebenzise i-CSEc (Ukuphepha) noma i-EEPROM ibhala/isule.
– 128-bit inombolo ye-Unique Identification (ID).
- Ikhodi Yokulungisa Iphutha (ECC) kumemori ye-flash ne-SRAM
- Iyunithi Yokuvikela Imemori Yesistimu (I-MPU yesistimu)
- Imojula ye-Cyclic Redundancy Check (CRC).
- I-watchdog yangaphakathi (WDOG)
- Imojula ye-Watchdog Monitor (EWM) yangaphandle

• Isikhathi nokulawula
- Amamojula azimele ayisishiyagalombili e-16-bit FlexTimers (FTM), anikela ngamashaneli ajwayelekile angama-64 (IC/OC/PWM)
– I-16-bit Low Power Timer (LPTMR) eyodwa enokulawula okuguquguqukayo kokuvuka
- Amabhulokhi Okubambezeleka Okuhlelekayo Okubili (PDB) anohlelo lwe-trigger oluguquguqukayo
– I-32-bit Low Power Interrupt Timer (LPIT) eyodwa eneziteshi ezi-4
- I-32-bit Real Time Counter (RTC)

• Iphakheji
– 32-pin QFN, 48-pin LQFP, 64-pin LQFP, 100-pin LQFP, 100-pin MAPBGA, 144-pin LQFP, 176-pin LQFP iphakhejiongakhetha kukho

• Iziteshi ezingu-16 ze-DMA ezinezicelo ezingafika ku-63 zisebenzisa i-DMAMUX