I-S9KEAZN64AVLCR ARM Microcontrollers – MCU KINETIS E SERIES 64K FLASH 4K RAM 40MHz 32LQFP
♠ Incazelo Yomkhiqizo
| Isibaluli Somkhiqizo | Isibaluli senani |
| Umkhiqizi: | I-NXP |
| Isigaba somkhiqizo: | I-ARM Microcontrollers - i-MCU |
| Uchungechunge: | I-KEA64 |
| Isitayela Sokukhweza: | I-SMD/SMT |
| Iphakheji / Ikesi: | I-LQFP-32 |
| Ingqikithi: | I-ARM Cortex M0+ |
| Usayizi Wenkumbulo Yohlelo: | awu 64kb |
| Ububanzi Bebhasi Ledatha: | 32 bit |
| Ukulungiswa kwe-ADC: | 12 kancane |
| Imvamisa yewashi enkulu: | 40 MHz |
| Inombolo yama-I/Os: | 28 I/O |
| Usayizi we-RAM yedatha: | 4 kb |
| Supply Voltage - Min: | 2.7 V |
| Supply Voltage - Max: | 5.5 V |
| Izinga Lokushisa Eliphansi Lokusebenza: | - 40 C |
| Ubukhulu Bezinga Lokushisa Lokusebenza: | + 105 C |
| Ukupakishwa: | I-reel |
| I-Analog Supply Voltage: | 2.7 V kuya ku-5.5 V |
| Ibhrendi: | I-NXP Semiconductors |
| Isixazululo se-DAC: | 6 bit |
| Uhlobo lwe-RAM yedatha: | I-SRAM |
| Idatha ye-ROM Usayizi: | 256 B |
| Uhlobo lwe-ROM yedatha: | EEPROM |
| Uhlobo lwesixhumi esibonakalayo: | I-I2C, SPI, UART |
| Kuyazwela umswakama: | Yebo |
| Inombolo yeziteshi ze-ADC: | 16 Isiteshi |
| Umkhiqizo: | I-MCU |
| Uhlobo Lomkhiqizo: | I-ARM Microcontrollers - i-MCU |
| Uhlobo Lwenkumbulo Yohlelo: | I-Flash |
| Inani Lephakethe Lefekthri: | 2000 |
| Isigaba esingaphansi: | Ama-Microcontrollers - i-MCU |
| Izibali-sikhathi ze-Watchdog: | I-Watchdog Timer |
| Ingxenye # Iziteketiso: | 935324986528 |
• Izici zokusebenza
Ibanga lamandla kagesi: 2.7 kuya ku-5.5 V
- Ububanzi be-Flash write voltage: 2.7 kuya ku-5.5 V
- Izinga lokushisa (okuzungezile): -40 kuya ku-125°C
• Ukusebenza
- Kufika ku-40 MHz Arm® Cortex-M0+ core kanye newashi lebhasi elifika ku-20 MHz
- Umjikelezo owodwa wokuphindaphinda okungu-32-bit x 32-bit
- Imbobo yokufinyelela ye-I/O yomjikelezo owodwa
• Izinkumbulo nezinkumbulo
- Kufika ku-64 KB flash
- Kufika ku-256 B EEPROM
- Kufika ku-4 KB RAM
• Amawashi
- I-Oscillator (OSC) - isekela ikristalu engu-32.768 kHz noma i-4 MHz ukuya ku-20 MHz ikristalu noma i-ceramic resonator;ukukhetha kwamandla aphansi noma ama-oscillator enzuzo ephezulu
– Umthombo wewashi langaphakathi (ICS) – i-FLL yangaphakathi enereferensi yangaphakathi noma yangaphandle, ireferensi yangaphakathi engu-31.25 kHz elungiselelwe kusengaphambili yohlelo lwe-40 MHz newashi eliyinhloko.
- I-oscillator yamandla aphansi engu-1 kHz (LPO)
• Ama-peripherals esistimu
- Imojula yokuphatha amandla (PMC) enezindlela ezintathu zamandla: Gijima, Linda, Yima
- Ukutholwa kwe-voltage ephansi (i-LVD) ngokusetha kabusha noma ukuphazamisa, amaphuzu ohambo angakhethwa
- I-Watchdog enomthombo wewashi ozimele (WDOG)
- Imojula yesheke ye-cyclic redundancy ehlelekayo (CRC)
- I-serial wire debug interface (SWD)
- Injini yokukhohlisa kancane (BME)
• Amamojula okuphepha nobuqotho
- Inombolo ye-ID (ID) eyingqayizivele engu-64-bit chip ngayinye
• Isixhumi esibonakalayo somshini womuntu
- Kufika ku-57 okufakwayo okuhlosiwe okujwayelekile (GPIO)
- Kufika ku-22 wenjongo evamile okokufaka/okuphumayo (GPIO)
- Kuze kufike ku-14 wenjongo evamile okokufaka/okuphumayo (GPIO)
- Amamojula amabili afika ku-8-bit aphazamisa ikhibhodi (KBI)
- Ukuphazamiseka kwangaphandle (IRQ)
• Amamojula e-analogi
- Ishaneli eyodwa kufika ku-16-bit 12-bit SAR ADC, ukusebenza kumodi yokuma, i-hardware trigger (ADC) yokuzikhethela.
- Iziqhathaniso ezimbili ze-analog eziqukethe i-6-bit DAC kanye ne-programmable reference input (ACMP)
• Izibali sikhathi
– I-FlexTimer/PWM (FTM) yamashaneli angu-6
- Amashaneli amabili we-FlexTimer/PWM (FTM)
- Isibali sikhathi sokuphazamisa ngezikhathi ezithile seziteshi ezi-2 (PIT)
- Iwashi lesikhathi sangempela (RTC)
• Izindawo zokuxhumana
- Amamojula amabili e-SPI (SPI)
- Kufika kumamojula amathathu e-UART (UART)
- Imojula eyodwa ye-I2C (I2C)
• Izinketho zephakheji
- 64-pin LQFP
- 32-pin LQFP
